Technical Analysis

ADX Indicator: Average Directional Index Explained

Most indicators try to tell you which way price is heading. The Average Directional Index (ADX) answers a different question: is there a trend worth trading at all? This guide explains +DI, −DI and ADX, what readings like 20, 25 and 40 mean, and how traders use filters such as “ADX(14) ≥ 25” in a stock screener.

🎯 Difficulty: Intermediate ⏱️ 11 min read 📅 Updated: Oct 2026

What Is the ADX Indicator?

The Average Directional Index (ADX) is a trend-strength indicator developed by J. Welles Wilder Jr. and published in 1978 in New Concepts in Technical Trading Systems, the same book that introduced the RSI and the Average True Range (ATR). ADX is plotted as a single line on a scale from 0 to 100, usually in a pane below the price chart.

The most important thing to understand about ADX is that it measures how strong a trend is, not which direction it points. A stock falling steadily and a stock rising steadily can both show an ADX of 35. Direction comes from two companion lines, the Positive Directional Indicator (+DI) and the Negative Directional Indicator (−DI), which together make up Wilder's Directional Movement System.

💡 Why trend strength matters

Trend-following tools such as moving-average crossovers work best in trending markets and generate many false signals in sideways ones. Oscillators such as RSI tend to behave the opposite way. ADX helps you decide which kind of tool fits the current chart.

The Components: +DI, −DI, DX and ADX

The Directional Movement System has four related pieces. Most charting platforms show ADX alone or all three lines together (ADX, +DI and −DI) in a single indicator called “DMI” or “ADX/DMI.”

LineWhat it measuresHow to read it
+DIStrength of upward price movement, relative to the true rangeRising +DI means highs are expanding upward
−DIStrength of downward price movement, relative to the true rangeRising −DI means lows are expanding downward
DXThe gap between +DI and −DI, as a percentage of their sumRaw, jumpy reading; rarely plotted on its own
ADXA smoothed average of DXHigher = stronger trend, in either direction

When +DI is above −DI, upward movement has been dominating; when −DI is above +DI, downward movement has. ADX then tells you how decisive that dominance is.

How ADX(14) Is Calculated

Wilder's default lookback is 14 periods, so on a daily chart “ADX(14)” covers roughly the last three weeks of trading (with the second smoothing step stretching its memory further back). You never need to compute it by hand, but knowing the steps explains why ADX behaves the way it does.

Step 1: Directional movement

Up move = today's high − yesterday's high
Down move = yesterday's low − today's low

+DM = up move if it is greater than the down move and greater than 0, otherwise 0. −DM = down move if it is greater than the up move and greater than 0, otherwise 0.

Step 2: True range

The true range (TR) is the greatest of: today's high minus today's low, the absolute value of today's high minus yesterday's close, and the absolute value of today's low minus yesterday's close. It is the same building block used by the ATR indicator, and it accounts for overnight gaps.

Step 3: Smooth and normalize

+DI = 100 × smoothed +DM ÷ smoothed TR
−DI = 100 × smoothed −DM ÷ smoothed TR

Wilder used his own smoothing method over 14 periods, which behaves like an exponential average with a slow (1/14) weighting.

Step 4: DX and ADX

DX = 100 × |(+DI) − (−DI)| ÷ ((+DI) + (−DI))
ADX = Wilder-smoothed average of DX over 14 periods

Because DX uses the absolute difference, the direction is stripped out. That is why ADX only measures strength.

The double smoothing (first the DM and TR values, then DX) makes ADX a slow, steady line. Different platforms may produce slightly different values depending on how they seed the first average and how much history they load, so small discrepancies between charting sites are normal.

ADX Levels: What 20, 25 and 40 Mean

There is no official scale, but the following conventions are widely quoted. Treat them as rules of thumb rather than precise boundaries; a given stock may trend cleanly with ADX at 22 or chop around with ADX at 28.

ADX readingCommon interpretation
Below 20Weak or absent trend; price is often ranging sideways
20 to 25A trend may be developing; a gray zone
Above 25Trending market; trend-following methods tend to fit better
Above 40Strong trend; also a zone where moves may be extended
Above 50Very strong and relatively uncommon on daily charts of large stocks

Wilder himself suggested 25 as a key threshold, while many modern traders use 20 as the line between “range” and “trend.” Neither is right or wrong; pick one, test it on the stocks and timeframe you trade, and stay consistent.

DI Crossovers: Reading Direction

Since ADX has no direction, traders look at the relationship between +DI and −DI:

  • Bullish DI crossover: +DI crosses above −DI, meaning upward movement has started to outweigh downward movement.
  • Bearish DI crossover: −DI crosses above +DI, meaning downward movement is now dominant.

On their own, DI crossovers whipsaw frequently in sideways markets, which is exactly where ADX is low. A common refinement is to only pay attention to crossovers when ADX is above 20 or 25, or rising. Wilder also described an “extreme point rule”: after a crossover, note the high (for a bullish cross) or low (for a bearish cross) of that bar and wait for price to break it before treating the signal as valid.

📌 Hypothetical example

A stock has been drifting sideways for two months with ADX around 15. Price breaks above its range, +DI crosses above −DI, and over the following two weeks ADX climbs from 15 to 27. The rising ADX suggests the breakout move is gathering strength rather than fading. This is an illustration of how the lines interact, not a trading signal.

Rising vs Falling ADX

The slope of ADX is often more useful than its absolute level:

  • Rising ADX means trend strength is increasing, whether price is going up or down.
  • Falling ADX means the trend is losing strength. Price may still be rising or falling, but more slowly, or it may be entering a consolidation.
  • ADX turning down from a high level (for example, peaking above 40 and then declining) is often read as a sign the trend is maturing, though it does not by itself signal a reversal.
  • Low and flat ADX for an extended period describes a quiet, range-bound market. Some traders watch for ADX to turn up from these lows as a hint that a new trend may be starting.

A key point that confuses beginners: a falling ADX in a downtrend does not mean the stock is going up. It means the downtrend is weakening.

Combining ADX With Other Indicators

ADX works best as a filter that tells you which other tools to trust. A few common pairings:

Moving averages and EMA stacks

A moving-average trend stack, such as price > EMA 20 > EMA 50 > EMA 200, shows trend direction and structure. Adding ADX > 20 or 25 helps confirm the trend has real strength rather than being a slow drift. Moving-average crossovers that occur while ADX is below 20 are more likely to whipsaw.

RSI

In strong trends (high ADX), RSI can stay above 70 or below 30 for a long time, so “overbought” and “oversold” readings are less reliable as reversal signals. In low-ADX, range-bound markets, classic RSI mean-reversion readings tend to make more sense. Some trend traders instead use RSI pullbacks to the 40–50 area as entries while ADX confirms the trend.

MACD

MACD crossovers are themselves trend-following signals. Requiring a rising ADX or ADX above 20 can filter out some of the crossovers that occur in choppy conditions. For a broader comparison, see RSI vs MACD.

Bollinger Bands

A Bollinger Band squeeze (narrow bands) often coincides with a low ADX, since both reflect a quiet market. When price closes outside the bands and ADX begins to rise, the two together describe volatility expanding into a directional move. A close above the upper band while ADX is falling, by contrast, may be more likely to fade.

ATR

ADX tells you how strong a trend is; ATR tells you how large the typical daily range is. Traders often use ATR to size stop distances once ADX has identified a trending stock.

Using ADX in a Stock Screener

Many screeners, including the TradingView-powered screener on Tockmarket, offer “ADX (14)” and sometimes “+DI” and “−DI” as filter fields. Below are educational starting points to adapt, not recommendations:

GoalExample filters
Uptrend with strengthPrice > 200-day MA, ADX(14) > 25, +DI > −DI
Trend follower (EMA stack)EMA 20 > EMA 50 > EMA 200, ADX(14) ≥ 20, average volume > 500K
Momentum breakoutChange ≥ 3%, close above upper Bollinger Band, ADX(14) ≥ 20, ATR(14) rising
Pullback in a trendPrice > 50-day MA, ADX(14) > 25, RSI(14) 40–50
Range-bound candidatesADX(14) < 20, price between 50-day MA ± 5%
Downtrend (for short-side study)Price < 200-day MA, ADX(14) > 25, −DI > +DI

Always add a liquidity floor (for example, price above $5 and average volume above 500,000 shares) so the list isn't filled with thinly traded names. See stock screener criteria for complete recipes, and remember that every added filter is an AND condition that shrinks the results.

ADX Pitfalls and Limitations

❌

Treating high ADX as bullish

ADX rises in strong downtrends too. Always check +DI vs −DI or the price trend itself before drawing a directional conclusion.

❌

Ignoring the lag

Because of its double smoothing, ADX reacts slowly. By the time it rises above 25, a meaningful part of the move may already have happened, and it can stay elevated after the trend has stalled.

❌

Reading a falling ADX as a reversal

A declining ADX means the trend is weakening, not that price is about to reverse. Prices often move sideways while ADX falls.

❌

Using fixed thresholds everywhere

Typical ADX levels vary by stock, sector and timeframe. A threshold that works on daily charts of large caps may not suit intraday charts or volatile small caps.

❌

Gaps and news events

A single earnings gap can inflate the true range and the directional movement values, pushing ADX up without a sustained trend behind it.

Frequently Asked Questions

What is a good ADX value?

By common convention, ADX below 20 suggests a weak or sideways market, 20 to 25 is a gray zone, above 25 indicates a trend, and above 40 a strong trend. These are rules of thumb; test thresholds on the stocks and timeframe you trade.

Does a high ADX mean the stock will go up?

No. ADX measures trend strength regardless of direction. A strong downtrend can have a high ADX. Use +DI versus −DI, or the price relative to its moving averages, to judge direction.

What is the default ADX setting?

Wilder's original setting is 14 periods, written ADX(14). Shorter settings such as 7 or 10 react faster but are noisier; longer settings such as 20 or 30 are smoother but lag more.

What is the difference between ADX and DMI?

DMI (the Directional Movement Index) usually refers to the +DI and −DI lines that show directional pressure. ADX is the smoothed average of the spread between them and measures trend strength. Many platforms display all three lines in one indicator.

How do I screen for stocks with ADX above 25?

In a screener that supports technical fields, add an ADX(14) filter greater than 25, then add a direction filter such as +DI above −DI or price above the 200-day moving average, plus a liquidity floor like average volume above 500,000 shares.

Is ADX a leading or lagging indicator?

ADX is a lagging indicator. It is built from smoothed averages of past price ranges, so it confirms trends that are already under way rather than predicting new ones.

Key Takeaways

1

ADX measures trend strength on a 0–100 scale; it does not show direction.

2

+DI and −DI show which side is dominant; their crossovers are more meaningful when ADX is above 20–25.

3

Common conventions: below 20 weak, 20–25 developing, above 25 trending, above 40 strong.

4

The slope of ADX matters: rising means strengthening, falling means weakening, not reversing.

5

Use ADX as a filter alongside moving averages, RSI, MACD and liquidity criteria, and remember it lags.