Stock Order Types Explained: Market, Limit, Stop & More
The order type you choose decides whether you get filled, and at what price. This guide explains market, limit, stop, stop-limit and trailing stop orders, auction orders and time-in-force instructions, with hypothetical examples showing what can go right and wrong.
Order Basics: Bid, Ask, Spread and Slippage
Every order you place is an instruction to your broker about what to buy or sell, how much, and under which conditions. Before comparing order types, it helps to know three terms:
- Bid: the highest price a buyer is currently willing to pay.
- Ask (offer): the lowest price a seller is currently willing to accept.
- Spread: the gap between bid and ask. Heavily traded large-cap stocks often have spreads of a cent or two; thinly traded stocks can have much wider spreads.
Slippage is the difference between the price you expected and the price you actually got. It is most common with market orders in fast-moving or illiquid stocks, and around the open, the close and news events. Checking average volume before trading is one of the simplest ways to gauge how much slippage to expect.
Market Orders
A market order tells your broker to buy or sell immediately at the best available price. It prioritizes speed and certainty of execution over price.
Hypothetical example: a stock shows a bid of $50.00 and an ask of $50.05. A market buy for 100 shares would typically fill near $50.05, but if only 40 shares are offered at $50.05, the remaining 60 may fill at $50.06 or higher.
- Pros: almost always fills during regular hours in liquid stocks.
- Cons: no price protection; in thin markets or volatile moments the fill can be far from the last quoted price.
Limit Orders
A limit order sets the worst price you will accept: a maximum price for a buy, or a minimum price for a sell. It prioritizes price control over certainty of execution.
Hypothetical example: you place a buy limit at $48.00 on a stock trading at $50.00. The order fills only if sellers are willing to trade at $48.00 or less. If the stock never drops that far, you never buy.
- Pros: you never pay more (or receive less) than your limit; useful in illiquid stocks and in extended hours.
- Cons: the order may fill partially or not at all, and you can miss a move entirely.
🎯 Partial fills
A limit order can be partly executed if only some shares are available at your price. The rest stays open until it fills, you cancel it, or it expires under its time-in-force instruction. Some brokers charge per execution, so check how partial fills are billed.
Stop Orders (Stop-Loss)
A stop order stays dormant until the stock trades at or through a trigger price (the stop price). Once triggered, it becomes a market order. Sell stops are placed below the current price and are commonly used as stop-losses; buy stops are placed above the current price, for example to enter on a breakout above resistance.
Hypothetical example: you own shares bought at $50.00 and place a sell stop at $46.00. If the stock trades at $46.00, the order becomes a market order and sells at the next available price, which could be $45.95, or lower in a fast market.
⚠️ Gaps can jump past your stop
A stop price is a trigger, not a guaranteed exit price. If bad news comes out overnight and the stock opens at $40.00, a sell stop at $46.00 triggers at the open and fills around $40.00, not $46.00. Stop orders limit risk in normal conditions but cannot prevent losses from gaps.
Stop-Limit Orders
A stop-limit order has two prices: a stop price that activates the order and a limit price that caps the execution price. Once triggered, it becomes a limit order rather than a market order.
Hypothetical example: sell stop at $46.00 with a limit of $45.50. If the stock trades down to $46.00, a sell limit at $45.50 goes live. It fills only at $45.50 or better. If the stock gaps to $40.00, the order does not fill, and you still own the shares.
Stop-limit orders protect you from very bad fills, but in a sharp decline they can leave you holding a position you wanted to exit. Choosing the gap between the stop and the limit is a trade-off between price protection and the likelihood of execution.
Trailing Stop Orders
A trailing stop is a stop order whose stop price moves automatically as the stock moves in your favor. You set the trail as a dollar amount or a percentage. For a sell trailing stop, the stop rises when the price makes new highs but never moves down.
| Hypothetical price path | Highest price so far | Stop with 10% trail |
|---|---|---|
| Bought at $50.00 | $50.00 | $45.00 |
| Rises to $60.00 | $60.00 | $54.00 |
| Pulls back to $57.00 | $60.00 | $54.00 (unchanged) |
| Falls to $54.00 | $60.00 | Triggered; sells at market |
Trailing stops help lock in part of a gain without constant monitoring, but a trail that is too tight gets hit by normal day-to-day noise. Many traders size the trail based on how much the stock typically moves, rather than a fixed round number. Like regular stops, trailing stops become market orders when triggered and can fill below the stop price.
Market-on-Open, Market-on-Close and Limit-on-Close
The exchanges run opening and closing auctions (see our stock market hours guide). Special order types let you participate in them:
- Market-on-Open (MOO): executes at the official opening price.
- Market-on-Close (MOC): executes at the official closing price.
- Limit-on-Close (LOC): executes at the closing price only if that price is at or better than your limit.
Exchanges set cut-off times for entering and cancelling these orders before the auction, and not every retail broker offers them. They are popular with investors who want the official closing price, for example to match an index fund's valuation.
Time in Force: How Long Your Order Lasts
Time in force (TIF) tells the broker how long an order should remain active if it doesn't fill right away.
| Instruction | Meaning |
|---|---|
| Day | Expires at the end of the trading day if not filled (often the default). |
| Good-'til-Canceled (GTC) | Stays open until filled or canceled. Many brokers cap GTC orders, for example somewhere between 60 and 180 days; the limit varies by broker. |
| Immediate-or-Cancel (IOC) | Fills whatever is available immediately; any unfilled portion is canceled. |
| Fill-or-Kill (FOK) | Must fill completely and immediately, or the whole order is canceled. |
💡 Extended-hours orders
Pre-market and after-hours sessions usually require a specific extended-hours flag, and many brokers accept only limit orders outside regular hours. Stop orders typically do not trigger in extended sessions at many brokers. Check your broker's rules before relying on an order outside 9:30 a.m. – 4:00 p.m. ET.
Order Types Compared
| Order type | Execution certainty | Price control | Typical use |
|---|---|---|---|
| Market | High (liquid stocks) | None | Getting in or out right now |
| Limit | Not guaranteed | Full | Buying dips, selling into strength, illiquid stocks |
| Stop (stop-loss) | High once triggered | None after trigger | Exiting a losing position; breakout entries |
| Stop-limit | Not guaranteed | Capped by limit | Exits/entries where a bad fill is unacceptable |
| Trailing stop | High once triggered | None after trigger | Protecting gains in a trending stock |
| MOO / MOC / LOC | Tied to the auction | None (MOO/MOC) or limit (LOC) | Trading at official open or close prices |
Common Order Mistakes
Market orders in thin or fast markets
Low-volume stocks, the opening minutes and news events can produce fills far from the quote. A limit order caps the damage.
Treating a stop price as a guaranteed exit
Stops convert to market orders; overnight gaps can fill them well below the stop price.
Stops placed at obvious round numbers
Many traders cluster stops just below obvious support levels and round numbers. Place stops based on where your trade idea is proven wrong, not on a convenient figure.
Forgetting about open GTC orders
A forgotten buy limit can fill weeks later after circumstances have changed. Review open orders regularly.
Wrong time in force for extended hours
A regular Day order may not participate in pre-market or after-hours trading. Use the extended-hours setting your broker requires.
Your choice of order type also depends on your style: active traders in day trading vs swing trading often rely on different tools.
Frequently Asked Questions
What is the difference between a market order and a limit order?
A market order executes immediately at the best available price, so it prioritizes speed but gives no price protection. A limit order sets the maximum price you will pay (or the minimum you will accept), so it controls price but may fill partially or not at all.
What is the difference between a stop order and a stop-limit order?
Both activate when the stock trades at the stop price. A stop order then becomes a market order and will usually fill, possibly at a worse price. A stop-limit order becomes a limit order, so it will not fill below (for sells) or above (for buys) your limit, but it may not fill at all if the price moves quickly.
Can a stop-loss order fill below my stop price?
Yes. Once triggered, a stop order becomes a market order. If the stock gaps down at the open or falls quickly, the fill can be well below the stop price.
How long does a good-til-canceled (GTC) order last?
It stays open until it fills or you cancel it, but most brokers set a maximum duration, commonly somewhere between 60 and 180 days. The exact limit depends on your broker.
Can I use market orders in pre-market or after-hours trading?
Many brokers accept only limit orders during extended-hours sessions because liquidity is thinner and spreads are wider. Check your broker's extended-hours rules.
Key Takeaways
Market orders prioritize execution; limit orders prioritize price
Stop orders become market orders when triggered and can fill below the stop after a gap
Stop-limit orders cap the price but may leave you unfilled in a fast move
Trailing stops follow the price up and help protect gains in trending stocks
Time in force (Day, GTC, IOC, FOK) and extended-hours rules vary by broker